| Oils for booster pumps |
| Mineral oils Mineral oils are oil out of distillation and refining products. They are a complex mixture undefined compounds, whose use is determined by pretreatment and composition. |
| Perfluorized Polyether (PFPE) Perfluorized Polyether consist of carbon, fluorine and oxygen atoms. The existing CO and CF-compounds are very stable and therefore almost inert against chemical and corrosive influences. PFPE does not polymerize under the radiation of high-energy. We offer Fomblin as PFPE oil. Important! Fomblin is not mixable with mineral oils! |
| Please inquire at: info@justvacuum.com |
| Diffusion pump oils |
| Silicone oils Perfluorized Polyether consist of carbon, fluorine and oxygen atoms. The existing CO and CF-compounds are very stable and therefore almost inert against chemical and corrosive influences. PFPE does not polymerize under the radiation of high-energy. We offer Fomblin as PFPE oil. Important! Fomblin is not mixable with mineral oils! |
| Mineral oils INVOIL 20 is a high-quality mineral oil, which is very well suitable for diffusion pumps through its high thermal stability. It can be used also for mechanical pumps. |
| Perfluoriezed Polyether (PFPE) Fomblin consists of carbon, fluorine and oxygen atoms. The existing CO and CF-compounds are very stable and therefore almost inert against chemical and corrosive influences. The Fomblin offered by us has an extremely low steam pressure and is therefore suitable particularly for UHV applications. |
| Please inquire at: info@justvacuum.com |
| Fats and thread lubricants |
| One uses vacuum lubricatns for the support
of the sealing effect with mechanical movements as well as for the
reduction of the abrasion at the sealing materials. Beyond that they can
be used for supporting the sealing effect of elastomer seals. Due to the
low steam pressure they are suitable for the application in the low
vacuum. |
| Our thread lubricant TL100 (Molykote 1000)
prevents the cold welding of bolt connections from rustproof steel also
at very high temperatures. The hot screw paste is applicable in the
temperature range of -30 °C to +1100 °C. Molykote consists of mineral
oil, fixed lubricant, thick and metallic powder. It secures even
pre-loading also with repeated release and tightening. Mineral fats Silicone greases Perfluorized of Polyether fats Hot screw paste |
| Please inquire at: info@justvacuum.com |